Concrete Coatings

Nikka Corporation provides the highest Quality Commercial and Industrial Coating for the floor coating industry. With more than 20 years of extensive field knowledge in seamless flooring systems. You’ll find that we are experts in providing the right product for your specific application. We Provide a complete line of products including Epoxies, Urethane, Polysparatics & crack fillers ,along with  resurfacers and High performance topcoats.

Waterbased Epoxy

NC- Water Based Epoxy Coating (NC-WBE) is a two component high strength, moisture tolerant, water based epoxy coating. NC-WBE has excellent chemical resistance, abrasion resistance, and substrate penetration. This product is a stand alone coating when installed in multiple coats. NC-WBE is suitable as a topcoat.

Polyaspartic P900

NC-P900 Polyaspartic is a two component 95% solids polyaspartic coating. P900 can be used as the base coat and as the topcoat with Chip/Flake decorative broadcasts or Quartz Aggregate broadcast floor systems. P900 has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clarity P900 can be tinted with NC P900 color packs. P-900 can be used over most all Nikka Coatings as a final topcoat

Oil Tolerant Epoxy Coating

NC- Oil Tolerant Epoxy Coating (NC-OTEC) is a two component solvent based epoxy coating that exhibits excellent characteristics for coating over petroleum based oil contaminated concrete. This product allows superior substrate penetration which results in excellent adhesion and is an ideal primer for the oil contaminated concrete substrate.

Novolac Epoxy

NC- Novolac Epoxy is a two component colored high solids novolac epoxy coating designed for application where splash and spills of acids, chemicals, and solvents occur.

Moisture Cure Urethane

NC- Moisture Cure Urethane (NC-MCU) is a one component moisture cured polyurethane floor coating that exhibits superior abrasion resistance, chemical resistance and flexibility. This product is UV stable. This product does not meet Federal VOC standards.

LOHS High Performance Urethane

NC- LOHS High Performance Urethane (NC-LOHS-HPU) is a three component low odor high solid urethane coating. This coating is extremely abrasive and chemical resistant, with superior flexibility and is UV stable.

High Performance Urethane

NC- High Performance Urethane (NC-HPU) is a two component high performance aliphatic polyurethane floor coating. This coating is extremely abrasive and chemical resistant, with superior flexibility and is UV stabile.

High Build Epoxy Top Coat

NC- High Build Epoxy Top Coat (NC-HBET) is a two component 100% solids colored epoxy coating. It is designed for applications where a thick mil / high build high performance impact resistant floor is required. This product is a stable color fast epoxy.

High Build Epoxy LV

NC-High Build Epoxy (NC-HBE-LV) is a two component 93% (+/- 1%) solids epoxy colored coating designed for applications where a high solids epoxy is needed before applying an additional coat or a 100% solids topcoats for build coats over concrete. This product can be used as a stand alone coating.

Elastomer Modified Membrane

NC-Elastomer Modified Membrane (NC-EMM) is a two component 100% solids epoxy designed for use underneath epoxy flooring systems for a seamless elastomeric membrane. The toughness and elongation eliminate the need to repair small static hairline cracks.

Crystal Clear Epoxy Binder

NC- Crystal Clear Epoxy Binder (NC-CCEB) is a two component 100% solids high performance epoxy coating that can be used either as a clear top coat or filled with paint chips, marble chips, or quartz aggregate mixtures.

Crystal Clear Epoxy LV

NC- Crystal Clear Epoxy Binder LV(NC-CCEBLV) is a two component 93% solids high performance epoxy coating that can be used either as a clear top coat or filled with paint chips, marble chips, or quartz aggregate mixtures.